2-Flute Carbide Stub End-mills (MN208) - (0.125" shank)

Metal Cutting - Stub Length End-mills

Geometry - 2 flute stub, 1/8 in. (3.18 mm) shank, modified fish-tail point
Length - 1.42 in. ±0.010 in. (1.50" OAL available)
Diameter tolerances:
- 0.1250 in.: +0.0000 in., -0.0020 in.
- 0.0625 in to 0.1200 in.: ±0.0010 in.
- 0.0010 in to 0.0624 in.: ±0.0005 in.
Shank dia. - 0.1248 in. (3.18 mm) +0.0000, -0.0002 in.
Max runout (TIR) - < 0.0005 in.
Max. depth of cut - DOC varies by diameter ±0.005 in. typically 1.5X dia.
Anticipated Life - 3,000 linear inches in 1 ounce (33 micron) copperclad
Material - solid submicrograin carbide
Ring Set -0.800 in. (20.32mm). ±0.004 in. (0.13mm) (CNC specific ring sets available)
Operating RPM - CNC certified operation 2k RPM to 100k RPM

Modified fish-tail point eliminates backside breakout and splintering
High flute volume supports high feed rates / chip loads
Cutting edge geometry virtually eliminates chatter at high feed rates
Flute geometry enhances rigidity for more accurate, single pass cutting at high chip loads

LPKF and T-Tech users must specify the make and model number of their CNC routers to insure that the rings are properly positioned!

Use a good, water based cutting fluid to improve finish and reduce tool wear.

Product Filter

Diameter	LOC	Reach	Flutes	Shank	OAL	Depth Rings	Part Number	Price
0.0050" (0.13mm)	0.0070" (0.18mm)	0.0400" (1.02mm)	2	1/8"	1.42" (36.1mm)	Not Available	MN208-0050-004FN	$32.86
0.0313" (0.79mm)	0.0625" (1.59mm)	0.1250" (3.18mm)	2	1/8"	1.50" (38.1mm)	Available	MN208-0313-013FN	$12.40
0.0350" (0.89mm)	0.0330" (0.84mm)	0.1000" (2.54mm)	2	1/8"	1.42" (36.1mm)	Available	MN208-0350-010FN	$12.40