CNC router bits and carbide cutting tools with tutorials and technical guides

2-flute Carbide Steel-Rule Die Counter-board Chamfering / Engraving / Cutout Bits (EM2D8-1250)

Engraving / Chamfering

These tools were designed with the assistance of numerous steel rule die shops that needed low-cost, high-speed tools for chamfering counter board channels and for depaneling the finished counters.

  • Geometry - 2 flute, 1/8 in. (3.18 mm) shank, spiral "V" point
  • Tip diameter - 0.0150 in. ±0.0002 in.
  • Length - 1.50 in. ±0.010 in.
  • Tip angle - nominal ± 1°
  • Shank dia. - 0.1250 in. (3.18 mm) +0.00, -0.0002 in.
  • Runout (TIR) - 0.0002 in. max
  • Max. Depth of Cut ( DOC) - varies by tip angle
  • Anticipated Life - 6,000 linear inches (Micarta®, Black Max®)
  • Material - solid submicrograin carbide
  • Ring Set - 0.800 in. ± 0.002 in.(optional)
  • Operating RPM - CNC certified operation 40k RPM to 100k RPM
2-flute Carbide V-tip engraving, chamfering, carving and cutout tool

Tip Diameter MaxDiameter LOC Flutes Angle Coating Shank OAL Depth Rings Reviews Part Number Price
0.0150" (0.38mm) 0.1250" (3.18mm) 0.418" (10.61mm) 2 30° 1/8" 1.50" (38.1mm) Available EM2D8-1250-30V

$12.73

0.0150" (0.38mm) 0.1250" (3.18mm) 0.418" (10.61mm) 2 30° ZrN 1/8" 1.50" (38.1mm) Available EM2D8-1250-30VC

$16.24

0.0150" (0.38mm) 0.1250" (3.18mm) 0.277" (7.02mm) 2 45° 1/8" 1.50" (38.1mm) Available EM2D8-1250-45V

$12.73

0.0150" (0.38mm) 0.1250" (3.18mm) 0.277" (7.02mm) 2 45° ZrN 1/8" 1.50" (38.1mm) Available EM2D8-1250-45VC

$16.24

0.0150" (0.38mm) 0.1250" (3.18mm) 0.205" (5.21mm) 2 60° 1/8" 1.50" (38.1mm) Available EM2D8-1250-60V

$12.73

0.0150" (0.38mm) 0.1250" (3.18mm) 0.205" (5.21mm) 2 60° ZrN 1/8" 1.50" (38.1mm) Available EM2D8-1250-60VC

$16.24

0.0150" (0.38mm) 0.1250" (3.18mm) 0.133" (3.37mm) 2 90° 1/8" 1.50" (38.1mm) Available EM2D8-1250-90V

$12.73

0.0150" (0.38mm) 0.1250" (3.18mm) 0.133" (3.37mm) 2 90° ZrN 1/8" 1.50" (38.1mm) Available EM2D8-1250-90VC

$16.24