Think & Tinker, Ltd.
CNC router bits and carbide cutting tools with tutorials and technical guides

PreciseBIT 2-flute, V-Tip Bits (EM2E4) - (0.2500" shank )

Engraving / Metal Cutting
  • Geometry - 2-flute, "V" point
  • Tip diameter - 0.0150 in. ±0.0005 in.
  • Tip angle - nominal ± 0.2°
  • Shank dia. - 0.250 in. (6.35 mm) +0.00, -0.0002 in.
  • Max. cutting diameter - 0.2500 in.
  • Max. depth of cut - DOC (penetration) varies by tip angle
    • 30° - 0.467 in. (11.9mm)
    • 45° - 0.302 in. (7.7mm)
    • 60° - 0.217 in. (5.5mm)
    • 90° - 0.125 in. (3.2mm)
  • Runout (TIR) - 0.0002 in. max
  • Anticipated Life - 4,000 to 6,000 linear inches (fiberglass, CNC milling)
  • Material - solid submicrograin carbide
  • Operating RPM - CNC certified operation 4k RPM to 40k RPM
Carbide 2-flute  V tip scoring, engraving and carving tool tip Carbide 2-flute  V tip scoring, engraving and carving tool tip

Units

V-tip carving / engraving 3-bit set (1 each 30°, 60° & 90° tools)..

$40.67
$47.85

V-tip carving / engraving 3-bit set (1 each 45°, 60° & 90° tools)..

$40.67
$47.85

V-tip carving / engraving 4-bit set (1 each 30°, 45°, 60° & 90° tools)..

$54.23
$63.80

ZrN coated 3-bit V-tip carving / engraving set (1 each 30°, 60° & 90° tools)..

$66.18
$77.85

ZrN coated 3-bit V-tip carving / engraving set (1 each 45°, 60° & 90° tools)..

$66.18
$77.85

ZrN coated 4-bit V-tip carving / engraving set (1 each 30°, 45°, 60° & 90° tools)..

$88.23
$103.80

Showing 1 to 6 of 6 (1 Pages)